aerial, direct-burying, wall-mounting, Pipeline laying way
30000 Set/Sets per Month OEM available
Packaging & Delivery
Inner package: Poly bag Outer package: Carton
Guangzhou / Shenzhen
ABS Horizontal type FO Splice Closure with two inlets/outlets
Type: Horizontal type two inlets/outlets
Purpose:aerial, direct-burying, wall-mounting, Pipeline laying way
Cables Entry & Exit:2Entry 2Exit
Cable Diameter (mm): Φ7-Φ30
Sealing Structure : Sticky cincture Sealing
Innovative design is an erect and horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.
It ensures long-term reliability and usage under ambient temperature from -40°C to +75°C
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Suitable for aerial, pipelined or direct buried applications; suitable for common fiber cables and ribbon cables; suitable for straight-through as well as for branch joints to seal and protect splice, fusion, layout and storage of the fiber cables .
(1) Environment Condition:
Environment Temperature: -40°C~+75°C
Atmospheric pressure: 70~106Kpa
(2) Electric property:
Insulation resistance between the metallic elements themselves and between metallic element and the earth is more than 2×104MΩ;
The Voltage resistance between the metallic elements themselves and between metallic element and the earth is 15KVDC/1min, Non-puncture, no arc-cover.
(3) Optic property:
The curvature radius of the spare fiber is over 37.5mm; no additional optic attenuation.
(4) Seal Performance:
Airproof performance: Airing pressure inside box 100Kpa, pointer immovability after 24 hours or no air bell within 15min when parked in the common temperature water.
(5) Re-encapsulation Performance:
No change in the index of air-proof performance after three times of repeat encapsulation
(6) Mechanical Performance:
After all the following tests, the box and all the components inside don’t change, check through gently or open it if necessary.
When the closures are pressurized up to 60 kPa, it can still meet the seal performance standard after the mechanical performance test
a. can withstand 1000N horizontal pull force;
b. can withstand 3000N/10cm vertical pressure;
c. can withstand 16N·m impact three times;
d. can withstand 50N·m twist force 10 circling times 10 cycles of ±90°twisting angle ;
1,It is better to fasten the bolts again thoroughly every 10 minutes after screwing down them.
2,Screwing down the bolts of the box should strictly act according to “installation instruction”.
3,please check whether the pothook connector has been installed or not before screwing down the box for aerial application.
You can see more infromation in our website.
1. We are one of the white hair of Copper System, Fiber Optic, Cable Assemblyproducts. 2. Competitive advantage products. 3.With us your money in safe your business in safe. 4. Full refundis available when bad quality or delay delivery has happened. 5. We have a 24*7 after sales service team to work for you. 6. Free sample offer & small order welcomed.
Lulink Electronics Technology Co. Ltd
Established in 2005 with headquarter and R&D managing department based in Guangzhou.
Lulink is an export organization specialized in developing, designing, producing network intelligent wire and telecommunication equipments, the products range consists of main categories and metal sheeting, Lulink is supported by a strong R&D team which has more than three years experience in the field of technology and integrating brilliant designers, technicians, support groups, sales and marketing organizations. We offer and accept OEM/ODM service to customers. We have experienced employees, respectively specialized in management, all the workers received the professional training with some years experience for their activities.
All has been certified by ISO9001:2008/ROHS/CE/UL/3C and so on.
You receive the highest quality products, delivered on time and 100% tested and inspected. We guaranty our products with long time end-to-end networks solution by the term. Lulink guarantees to offer safer and more reliable products with reasonable prices.
Q1. How can we know the products’ quality? We suggest you to buy a sample product first before placing a big order. Or you could talk to us online or send us an email if you need more detailed information for the specific product.
Q2. How about the sample fee and sample time?
For sample order, it is about 3-7 working days.As for sample fee is charged according to the size of the product.
Q3: Can you help me make my own design?
Yes, Sure. We can make OEM and ODM items for you as long as you can tell us your idea or provide pictures. We have done many OEM projects for our customers.
Q4. What is your payment term? A. T/T, L/C, Western Union, money gram and PayPal are all accepted. B. For bulk production: 30% deposit pay before mass production, and 70% pay before shipment.
Q5. Can we visit your factory? Yes, you can. You are most welcome to visit our factory and office. Please let us know before coming over and we will provide detailed route and hotel booking suggestions.
Lulink Electronics Technology Co. Ltd
#307-308, new world times centre, 2193# Guangyuan east road, Guangzhou. China.